Baseus Electric Smart Air Inflator - Gray
BASEUS Power Source Inflator Pump Wireless Smart Air Pump
Check tire pressure while inflating to prevent tire overpressure Tire pressure can be adjusted according to requirements, and inflation can be stopped automatically when tire pressure reaches preset levels
Comes with 2500mAh battery, no need to connect another charging cable when charging
High brightness LED light and metal construction, durable in use
Suitable for cars, bicycles, electric cars, basketballs, etc.
Input voltage: 5V 2.4A
Battery Capacity: 2500mAh
Rated power: 27.85Wh
Power: 54W
Charging time: about 4-5 hours
Size: 140.2 x 78.2 x 42.6 mm
Pressure gauge range: effective working range 5-120psi, effective detection range 5-150psi, exceeding 150psi may damage the sensor
Package Included:
1 x BASEUS Power Source Inflator Pump
1 x charging cable
1 x tube
2 x nozzles
1 x Pin
Baseus Energy Saving Feed Pump
A modern and intuitive tool, an inflator that is about the size of a power bank, helps greatly when inflating tires. During this activity, it allows you to monitor the pressure in the tires so that there is no excessive inflation. The device has the ability to charge wirelessly, and thanks to its large battery, you don't have to worry about running out of power. The pump is easy to use and safer than a conventional compressor.
Wide range of applications
The product is compatible with various things - it can inflate the wheels of cars, motorcycles, bicycles and even balls. It takes 4 minutes to inflate a car tire. It can inflate up to 9 car tires from 0 to 2.5 bar. Inflating a basketball takes less than a minute, and the device can inflate up to 54 size 5 balls.
High quality
It is the same size as most powerbanks. The pump can be easily stored anywhere in the car. It is made of solid and durable metal while maintaining an elegant look. The device is resistant to overheating thanks to the solution that dissipates heat. All thanks to the use of 274 holes in the casing on each side. Natural rubber, which covers the cables, is prone to flexing and does not crack. In addition, the design allows to reduce noise by 20%, which makes the device much quieter than a standard pump.
LED display
The device has a smart sensor built into the air flow nozzle, which automatically regulates the pressure at which the tires or balls are pressed.
Double pressure setting mode
The standard tire pressure gauge has been set. If you do not know the standard tire pressure, you can always inflate the tire further. You can easily increase or decrease the pressure to suit your needs. The device is not only useful and easy to use, it makes everyday life much easier even in the most difficult ways.
Function keys
Below the LED display are the function keys that can be customized according to your needs. You don't have to worry about looking at the screen all the time - the unit will automatically stop pumping when the tire reaches its ideal pressure level. It also shows the battery status.
metal cylinders
PTFE material is resistant to high temperatures, and its design allows for complete stability of the structure, even low-voltage magnesium operates at high engine revs. Do not be afraid of a cylinder exploding during very large changes in pumping pressure.
Noise reduction
The copper coil of the motor of the device reduces noise. The design has been perfectly applied to significantly reduce mechanical noise caused by the resonance of the device structure.
Safe lighting
The built-in LED light ensures the safe use of the product at night. In the event of an accident, the lamp can send an SOS signal.
Additional accessories
The device is equipped with additional accessories such as: a tube made of high-quality materials that prevents tube breakage, has a USB charging cable that can be connected to the car charger and includes a built-in air nozzle specially adapted for it. Inflate basketball.
Quick guide
- Put the appropriate nozzle.
- Press the M key to adjust the device pressure.
- Connect the air nozzle, gently press the OK button to start inflating.
- Stop when charging and pull out the air nozzle to stop inflation.
Customize
Manufacturer Baseus Model M Inflator pump Power source Product code CRCQB02-0A Weight 610g Input voltage 5V/2.4A Battery capacity 7500mAh Power 54W Charging time 4 to 5 hours B Size 78.2 x 140.2 x 42.6 mm
